Welcome to Silvercrest/SME.
Submersible motors, Subsea motors, ROV electric motors, HPUs.
Please contact us to discuss your submersible electric motor, subsea motor, and ROV motor requirements.
Also motor-pump sets and HPUs.
Contact us:
Tel: (+44) 1285.760620.
Email: sales@SilvercrestSubmarines.com
Silvercrest/SME specialize in the bespoke manufacturing of submersible motors, HPU's, and pumps for use on Rovs, subsea trenchers, subsea ploughs, dredgers and water lift pump systems, for use in the offshore Oil and Gas and Telecommunications industries.
We offer a range of submersible motors (5hp to 1500hp) with a choice of voltages (ranging from 380vac to 6600vac) for use subsea to depths of 6000msw.
All of these motors are available in either SS316, Duplex, Super Duplex, or Hard Anodized Aluminium finish. We can also design and build motors to suit your individual and special project requirements. In addition we refurbish, rewire, and service a wide range of submersible motors. Our product is excellent, our prices very competitive, and our delivery schedule the best in the industry.
We recently delivered ten 260kW, 3000VAC, double ended, 2-pole, stainless steel bodied motors, for use on a fleet of sub-sea trenchers. This was a bespoke order that was completed in just six weeks from receipt of order. In addition we also recently manufactured five (5) 400kw motors for SMD.
We supply submersible motors, and motor- pump sets to SMD, CTC Marine, Fugro, Impresub, Saab SeaEye, LDtravocean, and other subsea companies.
We would be very pleased to discuss the details of your motor / pump requirements in order to produce a detailed quotation for you.
Please contact us to discuss your subsea project and technical requirements:
Silvercrest / SME
Tel: (+44) 1285.760620
Email: sales@SilvercrestSubmarines.com
SME design, manufacture, and supply, submersible electric motors for bore-holes. SUBSEA and ROV electric motors for SUBSEA equipment. Submersible electric motors for sump pumps, and any special purpose submersible electric motor requirements. SME also offer SUBSEA electric generators for Tidal Power Generation.
Repair and rewind of large high voltage (500kW, 6600V) submersible electric motors.
SME High Temperature Submersibles in 6 inch to 20 inch frames suitable for operation in ambients of 75 Deg.C.
High Voltage water filled submersible motors (3300V, 4160V and 6600V).
Upgraded Temperature Monitoring units available with new improved user friendly parameter setting.
ROV motors suitable for depths of 4000M.
WD Series sump pump motors.
Subsea Electric Generators for Tidal Generation. Induction Generators or slow speed Permanent Magnet Synchronous Generators up to 500kW.
SUBMERSIBLE MOTORS.
SME has many years of experience with the design and manufacture of submersible motors, used in the offshore and dredging industries. This experience has resulted in SME being the company of choice as a manufacturer and supplier for many of the major offshore subsea companies
SME submersible motors are specially designed to suit customer requirements. With special attention being paid to the motor design. Resulting in SME manufacturing rugged motors with low maintenance requirements, a very high reliability, and a long service lifetime. Low speed designs are available up to 1.0 MW leaving out the need for a gearbox.
SME submersible motors have a generous overload margin with solid lamination, windings and rotor design. The SME submersible motor can be oil filled. Hence no re-greasing of the bearings is required. The oil filling also prevents condensation of water inside the motor.Cooling of the motor can be either by natural cooling or forced cooling by the surrounding seawater.
The following instrumentation is available:
Stator temperature measurement, Bearing temperature measurement
Oil temperature measurement
Pressure difference transmitter Seawater / Oil
Water leakage detection in auxiliary connection boxes
Factory load test
Horizontal or vertical mounting of the motor.
SME offer a Repair and Re-conditioning service for your used submersible electric motors. In addition to the manufacture of new submersible motors, we also carry out maintenance, repair and re-conditioning of submersible motors of our own design and third party motors. After Sales Support . Maintenance, repair and overhaul of large electrical motors of any make and type.
.
Company Profile: |
||
|
||
|
||
|
||
In our 1200 ft facility, purpose built for manufacture and service of Submersible Electric Motors we offer the following in house services: |
||
|
|
|
|
|
Full Machine Shop capacity. |
|
|
Voltage Testing through 10,000 volts. |
|
|
ISO9001 quality assured workshop. |
|
|
An Overhead crane through 10 tone capacity. |
|
|
A state of the art Water Pressure Test facility with full international certification |
|
|
High POT and Surge Testing. |
|
|
Full Load / Dyno testing to 250kw - All types of Electric Motors with detailed test reports. |
|
|
Balancing Facility available, to 250 kg. |
|
|||
Submersible Motor Engineering are a fully integrated manufacturing facility and in addition to our Standard range of products we also produce the following: |
|||
|
|||
|
|
Special Motors for specialist applications |
|
|
|
4 Pole, 6 Pole and 8 Pole motors. Motor-pump sets. HPUs. |
|
|
|
All Stainless Steel or more exotic material construction. |
|
|
|
Special Thrust ratings. |
|
|
|
Special Lead manufacturing. |
|
|
|
NEMA and other couplings in a variety of materials. |
|
|
|
Replacement parts of obsolete products. |
|
|
|
|
|
|
|
|
Submersible Motor Engineering are also able to provide the following Services: |
||
|
||
|
|
Technical assistance during Commissioning. |
|
Trouble Shooting. |
|
|
Repairs to all makes (Oil and Water filled). |
|
|
Rewinds of all Voltages (200 volt to 6.6kv) with 1 Year Warranty on all rewinds. |
|
|
Dynamic testing. |
|
|
Non-Destructive testing. |
|
|
Welding and Machining. |
|
|
On site or Factory Based Cable Splicing. |
|
|
Retro Fitting of Condition Monitoring Equipment. |
|
|
Modification of existing motors to upgrade them higher specifications. |
|
|
Refurbishment of ROV motors, motor-pump sets, and HPUs using more technically advanced materials.
|
Silvercrest / SME
Tel: (+44) 1285.760620
Email: sales@Silvercrestsubmarines.com